2026 Demon Tweeks Motorsport Catalogue - Flipbook - Page 335
from
1 • Foam Panel Filters
Foam panel filters are made from twin core Ramair Aeriform foam
and a stainless steel cage which is used in many of Ramair’s tier 1
motorsport applications for maximum strength. A rubber polymer
surround gives a fantastic clean and smooth finish with longevity
in mind.
1
£30.83
FOAM AIR FILTERS
2 • PRORAM Performance Panel Filters
from
PRORAM performance panel fitlers have been designed to replace
your standard OEM air filter inside your vehicle air box. These
filters are made using a high quality, high flow, synthetic nanofibre
filtration media which is pleated to maximise surface area and in
turn increase air flow.
2
£36.66
These filters use a twin layer foam filtration element to provide
optimal filtration while allowing for maximum air flow. The
foam is internally supported by T304 grade stainless steel cage
to ensure the filter stays in shape.
7 • Universal Rubber Neck Cone Air Filter
These universal cone shaped air filters base and neck are
constructed from a rubber polymer. They are suitable
for clamping onto a MAF sensor or rigid pipe.
Available in three filter base sizes - 150mm,
175mm and 200mm. Neck ID sizes range
from 50mm to 125m.
(CC-) from £33.52
See online for full range of replacement panels and fitment
CARBURETTOR SOCK AND POD FILTERS
Ramair’s hugely successful range of filter kits, designed to bolt directly to the carburettor body,
is used widely in both competition and street applications.
3 • Single and Twin Carb & ITB Baseplate Bolt On Filters
Ramair RS and RT carb air filters feature a fully rigid air filter and baseplate to mount onto the specified carburettor. They
are constructed using stainless steel cage internals and twin layer foam on the outside. The baseplates are precision cut
from aluminium and mount to the filter using quick release push clips and lock washers, all supplied. Filters available with
flat or domed tops.
Filter Options:
RS2 - Single and twin carb fitment, sold seperately from £63.54
RT1 - Single and smaller twin applications
from £109.90
RT2 - Twin carb & ITB
£109.90
RT3 - Twin carb & ITB, for larger applications
£109.90
Baseplates:
Using the application guide, select the baseplate suitable for
you. Blank plates are also available for the user to cut their own
required fitment. We can provide drawings of each baseplate prior
to purchase to ensure correct fitment.
Please call or visit our website for more information.
from
3
£63.54
from
7
£33.52
See online for full filter
specifications and more sizes.
8 • Universal Alloy Neck Cone Air Filter
The filter base and neck are constructed from spun aluminium, so its ideal for
fitting to a rubber or silicone intake hose. These are available in a range of neck
diameters all with a 60mm length neck. Also available with silicone coupler.
Small (Filter Dia 150mm)
Neck OD
60mm
(JS-102)
£32.27
70mm
(JS-105)
£32.27
80mm
(JS-107)
£32.27
90mm
(JS-150-90) £37.66
from
8
£32.27
Medium (Filter Dia 175mm)
Neck OD
60mm
(JS-175-60) £43.04
70mm
(JS-175-70) £43.04
80mm
(JS-175-80) £43.04
90mm
(JS-175-90) £43.04
100mm (JS-175-100)£43.04
Internal Filter Height:
All filters for carb fitment are measured and specified using the
internal height from the base plate to the underside of the filter
media. We suggest a further 20mm between the face of trumpets
and filter. Various heights available.
4 • Single PRORAM Carb and ITB Baseplate Bolt On Filters
Large (Filter Dia 200mm)
Neck OD
70mm
(JS-070)
£53.80
80mm
(JS-108)
£53.80
90mm
(JS-090)
£53.80
100mm (JS-109)
£53.80
Filter Options:
PR-RS2V2 - Single carb fitment, sold seperately
Baseplates:
Using the application guide, select the baseplate suitable for
you. Blank plates are also available for the user to cut their own
required fitment. We can provide drawings of each baseplate prior
to purchase to ensure correct fitment.
Please call or visit our website for more information.
Internal Filter Height:
All filters for carb fitment are measured and specified using the
internal height from the base plate to the underside of the filter
media. Ramair suggest a further 20mm between the face of
trumpets and filter. Various heights available.
(PR-RS2V2)
from £75.47
These filters feature a pleated synthetic nanofibre filtration
media for maximum surface area and increased filtration. This
allows for higher air flow with excellent dust and dirt filtration
to protect your engine. The top cap of the filter includes an
inverted cone to increase the intake. The base has a rubber
polymer neck for fitting to a MAF sensor or rigid intake pipe.
PRORAM RS carb air filters feature a fully rigid air filter and baseplate to mount onto the specified carburettor. Once
again making use of Ramair’s high quality, high flow, synthetic nanofibre filtration media to provide maximum surface
area to optimise airflow for induction ramming. Filter elements manufactured at three standard heights.
from
4
PRORAM PLEATED AIR FILTERS
£75.47
9 • Universal Cone Air Filters
These universal cone shaped air filters base and neck are constructed from a
rubber polymer. They are suitable for clamping onto a MAF sensor or rigid pipe.
5 • Carb Pull Over Sock Filters
Ramair sock style air filters are designed so that you can pull the air filter over the top of the trumpets of the
carburetor or the engine’s air intakes – whichever is necessary. They are constructed completely of foam which enables
them to locate in the most difficult of areas and gives the most air flow.
9
£39.10
Use the Part No: (CS-) online to search for a carb sock
that suits your required fitment. An internal stainless
steel structure can be included to help support the
carb sock.
from
5
£18.76
10 • Multi-Fit Cone Air Filter With Velocity Stack
PERFORMANCE INDUCTION KITS
6 • Performance Induction Kits
ALL PRICES PLUS VAT
PR-CC-150 (Cone Shaped)
Filter Base Width: 150mm
Filter Height: 140mm
Filter Top Width: 120mm
Neck Length: 25mm
Neck Dia Range: 60mm-114mm
(PR-CC-150) £39.10
PR-CC-120 (Cylindrical Shaped)
Filter Base Width: 120mm
Filter Height: 145mm
Filter Top Width: 120mm
Neck Length: 25mm
Neck ID Range: 60mm-76mm
(PR-CC-120) £39.10
External heights range from 75mm to 160mm and can
come in pack quanitities of 1-3.
Ramair induction kits take advantage of high flow filters,
lightweight heathsields, aluminium intake pipes, CNC anodised
replacement MAF housings and custom made silicone for perfect
fitment. Each kit is complete with every nut, bolt and bracket
required, high quality printed instructions and a high flow filter.
PRORAM Kits
(PRK)
from £106.96
PROMAX Kits
(PML)
from £124.95
Jetstream Kits
(JSK)
from £89.12
Supa Ram Kits
(SR)
from £59.60
AIR FILTERS •
REPLACEMENT PANEL FILTERS
from
6
£59.60
The top cap of the filter includes an inverted cone to increase the intake area
(excluding 63mm length filter) and the base has a 152mm diameter rubber neck
with a velocity stack insert which hass an aluminium neck to allow fitment tto
(VS) from £59.46
rubber or silicone hoses.
Velocity Stack
Overall Dia: 152mm
Neck Length: 25mm
Neck OD Range: 70mm-102mm
Filter
Filter Body Height: 63,115,178,300mm
Filter Base Width OD: 197mm
Filter Top Width OD: 120
Filter Neck ID: 152mm
from
10
£59.46
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
335
