2026 Demon Tweeks Motorsport Catalogue - Flipbook - Page 429
• Mechanical Gauges
1
52mm gauges with backlight and available with either black or white dial
faces. The temperature gauges have 2 metre capillary tubes with 3/8” BSP
male connections. Pressure and boost gauges have 1/8” BSP coned male
connections, lines supplied separately. (See page 308)
1 -15 - +30psi turbo boost pressure
(TBG30)
£60.85
2 -1 - +2 bar turbo boost pressure
(TBG2)
£60.85
0 - 15 psi fuel pressure
(FPG15)
£46.13
3 0 - 100psi oil pressure
(OPG100)
£51.83
0 - 160psi oil pressure
(OPG160)
£51.83
4 30 - 110°C water temperature
(WTG110)
£74.95
40 - 140°C oil temperature
(OTG140)
£79.95
5 Oil temperature/pressure 0 - 100psi 40 - 140°C
(OPOTG) £107.03
from
6
2
3
7
5
OIL AND FUEL PUMPS
from
£36.74
4
£17.94
• Electric Oil Pumps
Used in oil cooler installations for manual gearboxes and differentials as
well as turbo charger installations for pre-oiling and to provide a flow
of oil after shut down. Can be used when the vehicle is stationary when
extra cooling or lubrication is often most needed. Can greatly extend
turbo charger life.
8
£56.42å
Designed to be inserted into oil lines to take all makes of capillary gauge. Constructed from 2 part aluminium die
castings with an o-ring seal. Available with threaded or Push on hose connections.
Part No.
Price
(TGA2A)
(TGA2B)
(TGA2C)
(TGA4A)
(TGA4F)
(TGA4H)
(TGA3A)
(TGA3F)
(TGA3H)
£36.74
£63.34
£62.95
£36.74
£55.45
£58.91
£36.74
£64.98
£58.76
Tapping
Hose Connection Part No.
7 BILLET VERSIONS
3/8 BSP
M22 Female
(use with mocal adapters)
(TGA2-105)
3/8 BSP
32mm Push on
(TGA3M)
3/8 BSP
35mm Push on
(TGA3N)
3/8 BSP
38mm Push on
(TGA3O)
5/8 UNF
32mm Push on
(TGA2M)
5/8 UNF
35mm Push on
(TGA2N)
5/8 UNF
38mm Push on
(TGA2O)
8 Billet sandwich plate with 2 x 1/8NPTF
and 1 x 3/8 BSP ports
(TGASP200)
9 • Oil Cooler Fan and Bracket Combo
9
£104.51
£161.23
Suitable for transmission/differential
cooling, turbo oiling applications.
Pumps are both compact and durable
and brass pump body with bronze
gears is ideal for pumping a variety of
viscosity oil above 70 degrees C ( see
below for thermo switches ) Pump is
self-priming, can be located up to
1.5 metres above fluid level.
from
More pumps available please call
or visit our website
Flow Rate 0.3-7.5 litres per minute. 30 psi max rating. L 132, W 111mm,
D 77mm, weight 1.4kg, 12 or 24-volt DC. 3/8” BSP Ports IP67 Rated
12v
(EOP2) £161.23
24v
(EOP2-24) £180.16
£155.51
£155.51
• Mocal Gear Pump Fittings and Accessories
11
£23.75
12
£8.84
These switches are preset at the
pressure stated but are adjustable
between 15-150psi.
20 psi
(EWS/1C)
£23.75
35 psi
(EWS/1D)
£23.75
ALL PRICES PLUS VAT
15
15 • Mocal Gear Pumps
• EOP2
£120.13
£11.41
£11.41
£11.41
£11.41
£13.79
£11.41
£14.26
£11.41
£11.41
£11.41
£44.95
Flow Rate 0.3-3.3 litres per minute
and up to 21.75 psi max rating
L 126mm W 112mm D 75mm, weight
1.2kg, 12-volt DC 3/8” BSP Ports IP67
Rated
(EOP1) £161.23
11 • Low Pressure
Switch
(TP1)
(TP2)
(TP3)
(TP4)
(TP5)
(TP8)
(TPVW)
(TP9)
(TP6)
(TP7)
14
For use with electric oil pumps.
Surface mounted switch makes at
100°C. (EWS/1G)
£44.95
• EOP1
£104.51
10 • Tee Piece
14 • Temperature Switch
Two models are available:
Available in a range of thread types with a female 1/8
NPTF tapping to facilitate the fitting of switches or oil
pressure gauge. Please state thread type required.
M10 x 1
M10 x 1.5
M12 x 1.5
M14 x 1.5
£56.42
£104.51
£11.41
1/8” NPTF
1/4” NPTF
1/2” UNF
1/4” BSP
3/8” BSF
1/8” BSPT
£17.94
£24.02
£24.02
£24.02
£24.02
£24.02
£24.02
£120.13
from
10
Price
from
Plate aluminium bracket made to fit 3 most used size
Mocal oil coolers. Comes with correct fitting high quality
Spal fans and bolts. Choose between blow or suck fan
direction.
Bracket for 115mm 13 row - 96mm fan blow
(FB-1-13-SPAL-B)
Bracket for 115mm 13 row - 96mm fan suck
(FB-1-13-SPAL-S)
Bracket for 115mm 19 row - 130mm fan blow
(FB-1-19-SPAL-B)
Bracket for 115mm 19 row - 130mm fan suck
(FB-1-19-SPAL-S)
Bracket for 235mm 34 row - 225mm fan blow
(FB-5-34-SPAL-B)
Bracket for 235mm 34 row - 225mm fan suck
(FB-5-34-SPAL-S)
13
Built close to aerospace standards. The pump body is
machined from billet aluminium, rotating parts are heat
treated high speed steel in precision bearings. Has a built
in pressure relief valve. Flow rate 1.8 litres a minute, fixed
rate due to sliding vane design. 0 - 60 psi. Temperature for
constant use up to 150°c.
Weldon 12v 9200A Oil Pump
(WCP1) £611.88
Quick Release Mounting Bracket (not shown)
(WCP1B)
£46.52
• Oil Temp Gauge Adaptors
Tapping
Hose Connection
6 CAST VERSIONS
5/8 UNF
1/2” Push on
5/8 UNF
5/8” Push on
5/8 UNF
1/2 BSP
3/8 BSP
1/2” Push on
3/8 BSP
5/8 BSP
3/8 BSP
-8 JIC
M14
1/2” Push on
M14
5/8 BSP
M14
-8 JIC
£611.88
13 • Weldon
Sliding Vane Pump
OIL COOLERS AND ACCESSORIES •
ACCESSORIES
-6 JIC male/male adapter to suit with o ring
(MMA0-6-6X) each £13.55
-8 JIC male/male adapter to suit with o ring
(MMA0-8-6X) each £13.55
Thermostatic pump trigger switch 1/8” NPT male 82° (FS82)
£24.55
Thermostatic pump trigger switch 1/8” NPT male 88° (FS88)
£24.55
Many oil line adapters for these 1/8” NPT switches are available.
Please call or visit our website
from
16 • In Line Fuel Filter
12 • Warning Light
30mm diameter. Bulb Style available in green, blue and
white. LED style available in red and yellow. 12v.
(EWL)
£8.84
-6 JIC Male (100 Micron)
-6 JIC Male (240 Micron)
-8 JIC Male (100 Micron)
-8 JIC Male (240 Micron)
240 Micron filter ideal for Oil Pumps shown
16
£80.34
(ILF7-6-100)
(ILF7-6-240)
(ILF7-8-100)
(ILF7-8-240)
£80.34
£98.96
£94.82
£99.13
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 •
429
