2026 Demon Tweeks Motorsport Catalogue - Flipbook - Page 476
PIT EQUIPMENT • R A M P S
Pair from
NEW
£437.50
5
11
£223.81
11 • Wheel Cribs
5 • NEW Multi-Purpose Workshop Ramps
Multi-purpose ramps designed for use with trailers, 4-post, or 2-post lifts.
The notched cut-out integrates perfectly with workshop ramps, making
them ideal for low-clearance vehicles. Durable composite construction with
a textured surface ensures grip on concrete or painted floors. Load capacity
per ramp 2,500lbs (1100kg) for a total vehicle weight of 10,000lbs (4400kg).
Sold as a pair
Dimensions: 52” Long x 12” wide x 4” high
Weight: 17lbs (7.7kg) per ramp
(RR-SPR)
£437.50
Pair from
£415.22
1
Pair from
6
£224.82
Wheel Cribs are a lightweight and
safe alternative to axle stands. The
concave top cradles the tyre to
provide a stable platform whilst you
work under the car. Each crib can
support 1500lb (682kg) weight so a
set of four is suitable for a vehicle up
to 6000lb (2727kg). Sold in pairs.
Dimensions: 15” long x 8” high x
12” wide.
(RR-WC-8) £223.81
Dimensions: 15” long x 10” high x 12”
wide
(RR-WC-10) £243.05
Dimensions: 15.75” long x 12” high
x 12” wide. (RR-WC-12)
£263.31
Set of 4
12
£306.85
1 • Trailer Ramps
The ideal solution if your original trailer/transporter ramp is not long enough.
Trailer ramps can reduce the angle of approach to as little as 4 degrees making
them ideal for low race cars. Constructed from a composite material they are
lightweight and robust and completely weatherproof. They are designed not to
slip on hard surfaces such as concrete or tarmac and can also be used on grass
or dirt surfaces. Sold in pairs
46” long x 4” high x 14” wide. 5.5° incline (2” step)
(RR-TR-4)
£415.22
67” long x 5” high x 14” wide. 4° incline (2” step)
(RR-TR-5)
£493.20
45” long x 6” high x 14” wide 7.8° incline (2” step)
(RR-TR-6)
£429.39
74” long x 7” high x 14” wide. 5.2° incline (2.5” step)
(RR-TR-7)
£614.72
74” long x 7” high x 5.2” incline (1” step)
(RR-TR-7-TT)
£614.72
54.75” long x 8” high x 16” wide. 8.7° incline (3” step)
(RR-TR-8)
£547.88
Pair from
2
£541.81
3
6 • Vehicle Service Ramps
These vehicle service ramps from Race Ramps are extremely lightweight
and durable and are the perfect solution for replacing heavy steel ramps.
The unique construction is designed to not slide on garage floors or dig
into asphalt driveways and they can also be used on grass or dirt. They are
completely weatherproof and will not rust unlike traditional steel ramps.
40” Sport Ramps - Ideal for smaller sports cars with narrower tyres
(up to 8”) and low ground clearance.
Dimensions: 40” long x 7” high x 10” wide. 16 degree incline.
3000lb (1363kg) capacity per pair.
(RR-40)
£224.82
56” Race Ramps - For low ground clearance cars with up 10” wide tyres.
Dimensions: 56” long x 8” high x 12” wide. 10.75 degree incline.
3000lb (1363kg) capacity per pair.
(RR-56)
£358.50
2 Piece Version
(RR-56-2)
£402.05
67” Race Ramp XT - For low ground clearance cars with wide tyres
(up to 12”).
Dimensions: 67” long x 10” high x 14” wide. 10.75 degree incline.
3000lb (1363kg) capacity per pair.
(RR-XT)
£481.04
2 Piece Version
(RR-XT-2)
£558.01
7 • Rally Service Ramps
2 • Heavy Duty Trailer Ramps
Constructed from a heavy-duty composite material, they are lightweight,
robust and completely weatherproof. They are designed to not slip on hard
surfaces such as concrete or tarmac and can also be used on grass or dirt
surfaces. Extenders are also available to make loading onto a flatbed tow
truck even safer for vehicles with particularly low ground clearance, by
providing a 4° approach incline.
Dimensions: 42” long x 4.5” high x 10” wide. 5,2° approach incline
Capacity: 2500lbs (1100kg) per ramp
Weight: 15lbs (6.8kg) per ramp
(BT-TT-7-10)
£541.81
2-piece version
(BT-TT-7-10-2))
£592.44
3 Extenders
(BT-TT-7-EX-10)
£333.19
The rally service ramps are an ideal
alternative to heavy aluminium
ramps. Used to provide extra
ground clearance for rally cars to
enable a trolley jack to be put into
position. The ramps provide 3” extra
ground clearance and are 14” wide so
are suitable for even the widest rally
car tyres. Fitted with a carry handle for
easy transportation. Sold in pairs.
Dimensions: 36” long x 3” high x 14” wide.
Pair
7
£230.90
£253.18
12 • Flatstoppers
Vehicle Storage Aid
Flatstoppers from are perfect for
when your pride and joy is garaged
for the winter (or longer). They
prevent the tyres from developing
a flat spot from being stood for
long periods by supporting a larger
portion of the tyre in the concave
depression. Suitable for all cars with
a tyre diameter from 25”-30” and 12”
wide. Set of 4
(RR-FS)
£306.85
13 Same as above but 10” wide
(RR-FS-10)
£253.18
Each
14
(RR-TM-FRT)
£299.77
£66.84
NEW
Pair
Set of 4
8
£299.77
Set of 4
13
9
£161.02
Pair
4
£161.02
8 • Scale Ramps
4 • Trak-Jax Jack Clearance Ramps
Provides extra height to enable a trolley jack to be positioned under cars with
low ground clearance. Ideal for tarmac spec rally cars or saloon racers. It
removes the necessity for expensive low profile trolley jacks. Available with or
without a 1.5” high wheel stop.
Dimensions: 30.1” long x 3” high x 12” wide. 7.8° incline. Pair
With wheelstop
(RR-TJ-S)
£161.02
Without wheelstop (not shown).
(RR-TJ)
£161.02
476
Designed to allow a vehicle to be driven or pushed onto a 2.5” high corner
weight scale pad. The composite construction means they are ultralightweight and robust while the textured surface prevents slip on concrete
or painted floor surfaces. A simple run on ramp with no roll off platform.
Dimensions: 14” long x 2.5” high x 12” wide.
Weight: 3lb (1.36kg) Per ramp’ Set of 4
(RR-SCALE) £230.90
9 Longer version with a 12” long platform to allow the car to be rolled off
and back onto the scales.
Dimensions: 30” long x 2.5” high x 12” wide.
Weight: 4lb (1.82kg) per ramp. Sold in pairs
(RR-SCALE-2) £161.02
14 • NEW Wheel Chock
The Extra Wide Wheel Chock is
designed to safely secure your car in
place, ideal for when it is in storage
or during maintenance work. Its
30cm (12”) width accommodates
cars with wider tyres, making it
suitable for race cars or highperformance sports cars.
Each
(RR-RC-5)
£66.84
10 • Rack Ramps For 4 Post Lifts
As 8 but either use with standard ramps or for lifts with no ramps.
RACK 4 Suitable for use with 4 post lifts that have a permanently attached
ramp. A notch on the front edge accommodates the original ramp and with the
rack ramp the run on angle is decreased.
Spec: 27.5” long x 4” high x 14” wide. 9° incline
Weight: 10lb (4.55kg) each ramp.
(RR-RACK-4) £254.19
RACK 5 - For 4 post ramps that have no run on ramp.
A lip on the front edge bridges the gap between the Rack Ramp and lift
platform.
Spec: 40” long x 5.75” high x 14” wide. 8° incline
Weight: 10lb (4.55kg) each ramp.
(RR-RACK-5) £410.15
• SHOP ONLINE • www.demon-tweeks.com • SALES ORDER HOTLINE • 01978 664466 • ALL PRICES PLUS VAT
Pair from
10
£254.19
